User guide

3-4 Solo E1 DSU User Guide—June 1998
3
The default value is an empty text string. No password is required to log
on for the Þrst time. If you do not set a password for either parameter, any
user can access the Solo E1 DSU.
You can set both password parameters or only the Superuser password. If
you set only Superuser password, the Solo E1 DSU sets the user password
to the Superuser password.
Having the Superuser password allows you to set or change the passwords
(refer to ÒMenu-8 Alarm II ConÞgurationsÓ on page 3-19).
ConÞguring Password Protection:
Go to Menu-8 - Alarms II.
Highlight the Miscellaneous Mgmt. Config. option and press Enter.
Normal User Password *
Superuser Password *
Move cursor down to the Normal User or Superuser Password asterisk (*)
to highlight the Þeld you want to change.
Press Enter, then you will get the receive the following message:
Please enter a password [10 characters max]?
Type in the password (while you type this in, the asterisk (*) on the screen
remains unchanged). Press Enter.
Then you will receive the message:
Please retype password:
Type the password again, the press Enter. You will then be asked:
Do you really want to change the Password[Y/N]?
Press y and the password will be set.
The steps work the same for both Superuser and Normal User Password
settings.
User And Superuser Log On Rights
The Solo E1 DSU responds depending on who (user or Superuser) is
logged on. The Superuser always has access to the Solo E1 DSU, and
disconnects any user that is currently logged on to that Solo E1 DSU.