User guide

Caution
In accordance with FCC Part 15 section 15.21, changes or modiÞcations
made by the buyer that are not expressly approved by Digital Link
Corporation could void the buyerÕs authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet Appareil numerique de la classe A respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.
NOTE: As per the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI), the Solo E1 complies with
VCCI Class 1 ITE. This equipment is in the 1st Class category
(information equipment to be used in commercial and/or industrial
areas) and conforms to the standards set by the Voluntary Control
Council for Interference by Information Technology Equipment aimed at
preventing radio interference in commercial and/or industrial areas.
Consequently, when used in a residential area or in an adjacent area
thereto, radio interference may be caused to radios and TV receivers,
etc. Read the instructions for correct handling.
iv Solo E1 DSU User Guide—June 1998