User guide

Index I-3
I
Menu-9 Diagnostics 5-14
R
RAI Received Alarm
Menu-7 Alarm I 3-19
redrawing screen 3-6
RFC1406
SNMP network management 1-1
RS-232
straight-through ribbon cable 2-15
RS-449 interface 1-1
RTS
troubleshooting data port 6-6
S
Seconds in Current 15 Min 4-3
Self Test
running 2-9, 2-10, 5-4
Send All Ones
in Menu-9 Diagnostics 5-14
Send All Zeroes
in Menu-9 Diagnostics 5-14
SLIP
enabling 3-16
SNMP
conÞguring 3-7
network management 1-1
network management capability 3-15
network management station 4-1
Solo
status 4-1
status
front panel LEDs 4-1
stop bit
on modem 2-15
stop bits
setting B-7
Superuser Password 3-23
Sync Loss Alarm
Menu-7 Alarm I 3-18
T
TD/RD LEDs
troubleshooting data port 6-5
telephone number
dial-out capability 3-23
Telnet connection 3-3
terminal
connecting 2-15
managing and monitoring from 4-1
test
patterns 5-4, 5-14
self terminates 6-3
troubleshooting 6-3
time
conÞguring 3-9
resetting after powerup 3-9, 6-6
Timeout When Logged On
in Menu-8 Alarm II 3-23
timeslot allocation 3-7
troubleshooting 6-5
timing source
see clock
tray 2-4
troubleshooting
AC power 6-2
CTS LED 6-6
data port 6-6
data test set 6-5
DC power supply 6-2
dial-out capability 6-2
DTE 6-6
DTE cable 6-6
DTE device 6-6
E1 test set 6-3, 6-4
fuses 6-2
lamp test 6-4, 6-5, 6-6
LEDs 6-6
loopup code 6-3
NET LED 6-4, 6-5
Payload Loopback test 6-3
powerup 6-2
RTS/CTS LEDs 6-6
serial line 6-5
TD/RD LEDs 6-5
tests self terminate 6-3
timeslot allocation 6-5
timing source 6-5, 6-6
V.54 fractional loopback 6-3
yellow alarm 6-4
U
UA1 Received Alarm
Menu-7 Alarm I 3-19
UNIT Protect Mode
in Menu-4 Main ConÞguration 3-10
User Password 3-23
V
V.35 1-1
V.54 fractional loopback
troubleshooting 6-3
W
word length
on terminal or modem 2-8, 2-15, B-7