User guide

I-1
I
Index I
A
AC power supply
troubleshooting 6-2
alarms
troubleshooting 6-2
AMI E1 line code format
testing 5-10
AMI E1 line code format
testing 5-14
B
baud rate
on modem 2-15
on terminal and modem B-7
BER (Bit Error Rate)
QRW Pattern test 5-14
BPV (Bipolar Violations)
troubleshooting NET LED 6-4
bridge taps
testing 5-14
testing for 5-10
C
clearing counters 4-3
clock
troubleshooting 6-5, 6-6
Comm Port
as Output Port In Menu-0 3-17
COMM Port XON/XOFF
in Menu-8 Alarm II 3-23
connecting
DTE equipment 2-12
modem 3-25
multiple Solos
see daisy-chaining 2-16
terminal 2-15
Connection
inMenu-8 Alarms II 3-23
CRC
troubleshooting NET LED 6-4
CRC4 Threshold Alarm
Menu-7 Alarm I 3-19
Ctrl/L
redrawing screen 3-6
CTS
troubleshooting LED 6-6
CTS line (Pin 8)
daisychaining 2-16
CV Threshold Alarm
Menu-7 Alarm I 3-19
D
daisy-chaining
CTS line (Pin 8) 2-16
daisy-chaining Solo 56/64s 2-16
data port
conÞguring 3-11
Menu-5 Data Port ConÞguration 3-11
troubleshooting 6-6
data test set
troubleshooting 6-5, 6-6
date
setting and resetting 3-9
DB-15 connector 2-13
DC power supply
troubleshooting 6-2
diagnostics
how to run a test 5-1
Loop DTE test 5-6, 5-7
Loop NET test 5-7
Loop Payload test 5-7
Self Test 5-4
speciÞcations A-1
tests 5-1
dial-out capability 4-2
DTE 6-6
troubleshooting 6-6
DTE cable
connecting 2-12
DTE Loopback Test
testing from front panel 5-12
DTE Signal Loss Alarm
Menu-7 Alarm I 3-19
DTR
troubleshooting 6-6
E
E1 6-3
E1 test set