User guide

Software Download E-7
E
Error Indicators
If the download utility or the operational software fails, an error indicator
appears. Depending on the error indicator listed below, you can take the
following action or at least be apprised of the condition, as shown in Table
E-3.
Table E-3 Download Utility Error Indicators
Error
Indic. Error Type Description (Message)
1 General Software error. Note the specific error information,
and call Digital Link Technical Support.
2 General Load Received is corrupted.
3 General Load Received has invalid embedded length.
4 General Load Received is invalid for this unit.
5 Hardware Flash-ROM Not Supported.
6 Hardware Flash-ROM With Protected Sector.
7 Hardware Flash-ROM Failed To Erase.
8 Hardware Flash-ROM Failed To Program.
9 XMODEM XMODEM Abort Received.
10 XMODEM XMODEM Data Timeout.
11 XMODEM XMODEM Invalid Sequence.
12 XMODEM XMODEM Unexpected Data.
13 XMODEM XMODEM Packet Timeout.
14 XMODEM XMODEM Packet Corrupted.
15 XMODEM XMODEM Failed to Acknowledge.
16 XMODEM XMODEM Reserved.
17 XMODEM XMODEM Reserved.
18 XMODEM XMODEM Reserved.
19 TFTP TFTP Error Packet Received
20 TFTP TFTP Invalid Mode.
21 TFTP TFTP Invalid Opcode.
22 TFTP TFTP Unexpected Opcode Sequence.
23 TFTP TFTP Invalid Packet Length.
24 TFTP TFTP Invalid Data Packet Sequence.