User guide

5-16 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
5
The DL3800 conÞguration can only be changed when the unit is not in the
Protected Mode. In Protected Mode the conÞguration can only be viewed
but not changed. To use the CONFIGURATION MENU, the user selects the
CONFIGURATION SUB-MENU from a hierarchical list, and presses the
ENTER button. The user then proceeds through the hierarchical menu
structure to view or change the chosen parameters. When the user is done
using the CONFIGURATION MENU, the EXIT button is pressed.
Table 5-4 CONFIGURATION MENU Items
Menu Definition
NODE CONFIG MENU Used to set the unit’s ID, date, time, and communications port. It also shows
the user the hardware and software versions
NODE CONFIG
NETWORK CONFIG
NET 1 CONFIG
NET 2 CONFIG
ENTER
EXIT
ENTER
EXIT
DTE
Use Up and Down Arrows to
Select Conigurable Item
EXIT
EXIT
EXIT
EXIT
EXIT
Return to Menu
item: CONFIGURATION
DTE CONFIG
NETWORK CONFIG
ENTER
EXIT
ENTER
EXIT
ENTER
EXIT
NODE CONFIG
Use Up and Down Arrows to
Select Conigurable Item
Use Up and Down Arrows to
Select Conigurable Item
Use Up and Down Arrows to
Select Conigurable Item
Use Up and Down Arrows to
Select Conigurable Item
NET 1 CONFIG
NET 2 CONFIG
CONFIGURATION MENU
BACKUP DATABASE
Hit ENTER to Backup Database
EXIT ENTER
EXIT
BACKUP DATABASE
NET THRESHOLDS
EXIT
ENTER
EXIT
Select Conigurable Item
NET THRESHOLDS
Use Up and Down Arrows to