User guide

5-12 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
5
The Test Menu is broken down into two types of sub-menus: DTE TESTS
(one menu) and NETWORK TESTS (one for each network interface
installed). Through these Sub-Menus, the user initiates and stops various
tests and loopbacks.
The TEST Menu is accessed from the Main Menu by pressing ENTER when
TEST appears in the display. Pressing the down or up arrow toggles
through the three sub-menus. The Sub-Menus are accessed by pressing
ENTER when the appropriate menu appears in the display.
DTE TESTS
NET 2 TESTS
NET 3 TESTS
NET 4 TESTS
ENTER
EXIT
ENTER
EXIT
LINE LOOPBACK
TEST MENU
EXIT
EXIT
EXIT
EXIT
EXIT
Return to Menu
item: TESTS
NET 1 TESTS
LOCAL LOOPBACK
LINE LOOPBACK
ENTER
EXIT
ENTER
EXIT
PAYLD LOOP
ENTER
EXIT
Strike ENTER to activate
DTE/NET LOOP
DTE/NET LOOP
Use Up/Down Arrows to select
PAYLD, LINE or LOCAL Loopback.
Strike ENTER to actiuvate.
Use Up/Down Arrows to select
PAYLD, LINE or LOCAL Loopback.
Strike ENTER to actiuvate.
Use Up/Down Arrows to select
PAYLD, LINE or LOCAL Loopback.
Strike ENTER to actiuvate.
Use Up/Down Arrows to select
PAYLD, LINE or LOCAL Loopback.
Strike ENTER to actiuvate.