User guide

Front Panel Interface 5-9
5
If one of more errors are detected, one or more of the following messages
will appear. Use the up and down arrow buttons to view the following
messages, see Table 4-2 on page 4-6 of this Users Manual for a list of those
Common Equipment Alarm and Status items that could appear in this
menu.
DTE Status
The next display shows the status of the DTE data port. The Menu is
accessed by pressing ENTER when DTE STATUS appears in the display.
If errors are detected, one or more of the following messages will appear.
Use the down and up arrow buttons to view further messages.
See Table 4-2 on page 4-6 of this Users Manual for a list of those Common
Equipment Alarm and Status items that could appear in this menu.
NET (1-8) Status
The next eight displays show the status of the T1 Networks (NET 1
STATUS through NET 8 STATUS if all are installed). Use the up and down
arrows to select the T1 Network to be monitored and press the ENTER
button. Use the up and down arrow to view further status items relating
to the same T1 circuit.
See Table 4-2 on page 4-6 of this Users Manual for a list of those Common
Equipment Alarm and Status items that could appear.
NET (1 through 8) Statistics
The Menu provides the user with the various performance statistics of the
individual T1 circuits. These performance statistics are listed and deÞned
in Table 5-3. To view the statistics of a particular T1 circuit, press the
ENTER button when the display reads NET N.STATISTICS, where N is the
number of the desired T1 network port.
The following table lists and explains the information that can be viewed
from the NET Statistics menu, for each performance statistic:
Table 5-2 NET Statistics Menu Information Display
Front Panel Display Explanation
NET N XXX XXX = the performance statistic.
N = the T1 network port (1 through 8).