User guide

5-6 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
5
Figure 5-1 Front Panel Top Level Menu
This menu loop may also be entered at any time by pressing the EXIT
button to go up the menu hierarchy until reaching the Top Menu.
Continuing to press the EXIT button while in the Top Menu brings the unit
to the default display DL3800 INVERSE MULTIPLEXER scrolling across the
screen. Pressing the up and down arrows get the user into the menu loop.
A menu is selected by pressing the ENTER button when the menu name
appears on the display.
The Display Menu is used for displaying Node Status, DTE Status, and
Status of each installed T1 network. The 24-hour line data is only available
with the terminal interface or through the Network Manager. The data in
the Display menu is a subset of the parameters that are available on the
Alarm and Status Menu through the terminal interface, or the Network
Manager.
The Test Menu is used for DTE and Network loopbacks. The DL3800 does
not allow performing tests on the remote unit through the front panel user
interface. This feature is only available with the terminal interface.
Test Menu
DL3800 Inverse Mux
SELECT REMOTE
DISPLAY
TEST
Select Remote/Local
Display Menu
ENTER
EXIT
ENTER
EXIT
ENTER
EXIT
EXIT
EXIT
EXIT
CONFIGURATION
ENTER
EXIT
Configuration Menu
EXIT