User guide

4-32 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
4
Table 4-8 Login Configuration Options
Parameter Description
Full Access Class Allows the user to view any menu and perform any function. It is the only
access class where the user is allowed to view the LOGIN
CONFIGURATION MENU and assign names, passwords, and access
levels to users. This user is also the only one who can change the SNMP
Configuration, Download Software, or Delete Entire Node Configuration
Maintenance Allows the user to clear the event history log, clear statistics, and initiate
tests.
Provision Allows the user to configure the DL3800.
Provision + Maintenance Allows the user to perform all functions allowed Provision and
Maintenance access described above.
Display Only Allows the user access to view only screens. The user is not allowed to
make any changes or initiate tests.
No Access Not allowed to access the menu screens.
Terminal Automatic
Logout
Allows the user to set the Automatic Logout feature of the DL3800. The
unit will logout if no activity is detected for the amount of time
configured.
To change configuration, highlight the item and, using the Space Bar,
toggle until your selection appears. Move the highlight to Confirm, and
press Enter to confirm the change. The default is Off, with three min.,
five min., 10 min. and 30 min. also configurable.
Telnet Automatic Logout Same as Terminal Automatic logout, but for telnet connections. The
default is five min., with Off, three min., 10 min. and 30 min. also
configurable.
NOTE: If the user tries to access a screen or perform a function beyond
their access level allowed, the following message will appear on the
screen: “Access denied - your account does not have this PRIVILEGE”.