User guide

Terminal Interface 4-19
4
Figure 4-11 Network Configuration Screen (DSX-1 Mode)
Table 4-7 NETWORK CONFIGURATION MENU Options
Parameter Description/Action
Alarm This item allows the user to enable (Report) or disable (Mask) the DL3800
from reporting alarms or sending SNMP traps from any of the individual T1
network ports.
To change the present Alarm mode, use the up and down arrow keys to
highlight the Alarm item in the appropriate line for the desired port, and use
the Space Bar to toggle between Report and Mask. Highlight Confirm,
and press the Enter key to confirm any change. (Default - Mask)
Active/Restore Mode This option selects the Active/Restore Mode for each of the T1 network
ports.
To change the present mode, use the up and down arrow keys to highlight
the Active/Restore Mode option for the desired port, and use the Space
Bar to toggle between the following selections until the desired choice
appears: use w/auto restore (failed line is restored automatically when
problem is solved); use w/manual restore (user must manually restore
line); Never Use (never mux data onto this line); Always Use (always mux
data onto this line, even when it’s bad). (Default - Never Use)