User guide

4-14 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
4
Figure 4-9 UNIT CONFIGURATION MENU
Table 4-5 Node Configuration Options
Option Action
Date Move the highlight bar to Date, and enter a valid date with the format
MM/DD/YY, and press the Enter key.
MM:12 month
DD:31date
YY: 99year
Time Move the highlight bar to Time, and enter a valid time with the format
hh:mm:ss, and press the Enter key.
Alarm Enable Highlight Alarm Enable, and using the Spacebar, toggle between
Enabled and Disabled until the desired choice appears.
Automatic Backup This feature allows the user to back-up the database to the EEProm
automatically at certain intervals or manually. To change the present backup
mode, highlight Automatic Backup, and use the Space Bar to toggle
between the following choices: after every database change, 15 seconds,
30 seconds, 1 minute, or five minutes after each change, or Off (must
change manually with Save Configuration).
Front Panel This feature enables (On) or disables (Off) the users ability to make changes
in the configuration or run tests from the front panel display and buttons. To
change the Front Panel feature, highlight Front Panel, and use the Space
Bar to toggle between Off and On.