User guide

Terminal Interface 4-13

Figure 4-8 CONFIGURATION MENU

To access any of the CONFIGURATION SUB-MENUS, highlight the

desired item and press the Enter key. The following are samples and

descriptions of the Sub-Menus that can be accessed from the

CONFIGURATION MENU.

Unit Conﬁguration

Highlighting Unit and pressing the Enter key accesses the UNIT

CONFIGURATION MENU shown in Figure 4-9. The conÞgurable items

and options are described in Table 4-5.

The following parameters can be set or changed for the Node: DATE,

TIME, ALARM ENABLE, AUTOMATIC BACKUP, FRONT PANEL, UNIT

NUMBER, UNIT NAME and LOCAL TERMINAL BAUD RATE,

BITS/PARITY, STOP BITS, X-ON/X-OFF and MULTIDROP MODE.

HARDWARE, SOFTWARE and MIB REVISIONS are view only items and

cannot be changed.