User guide

4-4 DL3800 DS1 Inverse Multiplexer User Guide—February 1999

INVERSE MULTIPLEXER MAIN MENU COMMANDS

When a DL3800 is Þrst powered up, the Main Menu (Figure 4-1 on page 4-

3) appears on the terminal screen. This describes those functions that can

be performed, parameters viewed, changed and/or deleted from this

menu. The INVERSE MULTIPLEXER MAIN MENU items are shown in

Table 4-1.

These items are described in more detail in the following sections.

SELECT LOCAL/REMOTE

When in the INVERSE MULTIPLEXER MAIN MENU, this option allows

the user to view and access the other items on either the local or remote

DL3800. The Device Address and Name in the header portion of the

display screen will identify the unit that the terminal is presently

communicating with.

To move to the Main Menu of the other DL3800, highlight

SELECT

LOCAL/REMOTE and press Enter. The Device Address and Name in the

header should change to the new unit as shown in Figure 4-2.

Table 4-1 Main Menu

Menu Description

Select Local/Remote Allows the user to move between the Main Menu of the Local and

Remote units.

Alarms and Status Provides current alarm and status report of the common equipment, DTE,

and T1 lines.

Statistics Allows the user to access the statistics menus of the various T1 lines.

Event History Allows user to view and clear alarms and event history of the DL3800.

Conﬁguration Allows the user access Sub-Menus to conﬁgure certain parameters of the

DL3800, network, and DTE.

System Utilities Allows the user to perform various system utility functions such as

download software, conﬁgure SNMP, conﬁgure login, and delete or save

conﬁguration.

Tests Allows the user to initiate diagnostic loopbacks.

Manual Network Restoration Allows the user to manually restore a T1 circuit instead of it being

restored automatically upon the clearing of a problem.

Logout Allows the user to log out of the DL3800 without having to wait for

automatic logout.