User guide

3-2 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
3
a. ConÞgure COMM PORT
See ÒUnit ConÞgurationÓ on page 4-13 (ASCII terminal)
b. ConÞgure NMS (Network Management) Port
See ÒSNMP ConÞgurationÓ on page 4-33 (ASCII terminal)
9. ConÞgure Network
See ÒNetwork ConÞgurationÓ on page 4-18 (ASCII terminal)
10. ConÞgure DTE
See ÒDTE ConÞgurationÓ on page 4-16 (ASCII terminal)
MOUNTING THE DL3800
Rack Mounting
The DL3800 is shipped with mounting ears attached to the unit ready for
rack mounting onto a 19-inch rack. A 19-inch rack mounting kit is
available from Digital Link.
Desk Operation And Stacking
Four stick-on rubber feet are supplied with each DL3800 DS1 Inverse
Multiplexer. Remove the covering from each rubber foot, and stick them
onto the bottom of the DL3800. The DL3800 units may now be stacked as
required on a ßat surface in a well-ventilated and secure area.