User guide

3-1

Installation 3

DL3800 INSTALLATION PROCEDURE

1. Unpack and inspect the DL3800 for damage that might have

occurred during shipment. If necessary, wipe off the exterior with

a soft cloth. Save all packing slips and papers that come with the

unit. Save the shipping cartons and packing materials until

installation is complete and proper operation is veriÞed.

2. Verify that all items ordered are included in the shipment. The

shipment should consist of the following:

¥ DL3800 Digital Inverse Multiplexer

¥ DL3800 Users Manual.

¥ Appropriate data and network interface cables and connectors (if

ordered).

¥ Power cord

3. Mount the DL3800

See ÒMounting The DL3800Ó on page 3-2.

4. Connect Power Cables and Connections

See ÒPower Cables And ConnectionsÓ on page 3-3

5. Connect network cables to DL3800

See ÒT1 Network ConnectionÓ on page 3-4

6. Connect DTE cable to DL3800

See ÒDTE Cable And ConnectionÓ on page 3-4

7. ASCII Terminal and SNMP Connection

See ÒASCII Terminal and SNMP ConnectionÓ on page 3-5

8. ConÞgure Unit

See ÒUnit ConÞgurationÓ on page 4-13 (ASCII terminal)

NOTE: Before beginning the installation process, inspect the DL3800

for damage which may have occurred during shipment. If damage has

occurred, notify Digital Link and your package carrier immediately.