User guide

6-8 DL3800 DS1 Inverse Multiplexer User Guide—February 1999
6
You cannot access the
DL3800 from a terminal.
The terminal must be running a VT100 or compatible terminal emulation
program.
Make sure you are using a straight through cable with pin 8 CTS cut at the
terminal end.
Make sure the Comm Port parameters match the terminal’s, and the DL3800
has a unique ID. If the DL3800 is in a daisy-chain, you can display a roll
call of all unit numbers by pressing Ctrl-x five times.
Table 6-1 Troubleshooting
(5 of 5)
Problem Solution