User`s guide

5-24 DL3100 User’s Guide—November 1998

¥ Event Code

Number designation for type of alarm or status condition.

¥ Description

Describes the event.

Monitoring T3MB Bandwidth and Connections

The T3MB Bandwidth & Connections Menu displays the amount of

bandwidth allocated to each DTE board, as well as the total bandwidth

currently in use.

To access the T3MB Bandwidth & Connections Menu (Figure 5-12), select

T3 Bandwidth & Connections from the Node/T3MB Main Menu and press

Return.

Figure 5-12 T3MB Bandwidth & Connections Menu

Using the System Utilities

In this section you will learn to perform the following system utilities:

¥ Delete the entire node conÞguration

¥ Download software

¥ Backup the database

NOTE: This is a view-only menu. You cannot allocate bandwidth using

this menu. To allocate bandwidth, select T3 Timeslots from the

HSDB/HVDB Conﬁguration and Connections Menu. For information on

bandwidth, see “Conﬁguring the HSDB and the HVDB” on page 4-21

in Chapter 4, “

Conﬁguring the DL3100.”