User`s guide

Monitoring and Managing the DL3100 5-21

To access the Current HSDB Statistics Menu, select the HSDB device from

any of the main menus. Then select Statistics from the HSDB Main Menu.

Follow the same procedure for the HVDB device.

The Current HSDB and Current HVDB Statistics Menus look exactly the

same except for the menu name. Figure 5-10 shows an example of the

Current HSDB Statistics Menu.

Figure 5-10 Current HSDB Statistics Menu

To view additional pages with this same set of performance data, use the

up and down arrows (as appropriate) to scroll through the pages.

To update the Current HSDB and HVDB Statistics menus, select Repeat

and press Return.

HSDB and HVDB Statistics Parameters

The HSDB and HVDB Statistics parameters are as follows:

¥ Parloc

DTE Parity Lock (Parloc) is the number of seconds during which a

parity error was detected on trafÞc from the T3MB to the DTE board.

NOTE: For HSDB and HVDB statistics, current data represents the current

15-minute interval. Cumulative data is deÞned as the number of errors

occurring over the past 24 hours, in 15-minute intervals (including the

current interval).