User`s guide

Monitoring and Managing the DL3100 5-5

Viewing the Status of the T3 Link

You use the Remote Node Map menu to view the status of the T3 link. This

is a view only screen that displays the remote node address, the device

type, and the status of the link (up or down).

To access the Remote Node Map (Figure 5-3), select it from the

Node/T3MB Main Menu.

Figure 5-3 Remote Node Map

Monitoring Alarms and Status

To monitor DL3100 alarms and status, youÕll use the following submenus:

¥ Current T3MB Alarms and Status Menu

¥ Current HSDB Alarms and Status Items Menu

¥ Current HVDB Alarms and Status Items Menu

Monitoring Network Alarms and Status

The Current T3MB Alarms and Status Menu allows you to view the status

of the T3 network.

To access the Current T3MB Alarms and Status Menu, select T3MB Alarms

and Status from the Node/T3MB Main Menu and press Return. The

Current T3MB Alarms and Status Menu (Figure 5-4) will appear listing the

type of each event deÞned by severity (status, major, minor, or idled).

NOTE: This is a view-only screen; you cannot make changes to it.