User`s guide

Configuring the DL3100 4-23
4
To access the HSDB ConÞguration and Connections Menu, select the HSDB
device from any main menu. Next select ConÞguration & Connections
from the HSDB Main Menu and press Return.
Figure 4-11 shows an example of the HSDB ConÞguration and Connections
Menu.
Figure 4-11 HSDB Configuration and Connections Menu
HSDB Configuration and Connections Menu Parameters
The HSDB ConÞguration and Connections Menu parameters are as
follows:
¥ Module ServiceÑIn Service or Out of Service (DefaultÑIn Service).
Allows you to place the HSDB in or out of service. Module Service
affects the HSDBÕs ability to declare alarms. An HSDB that is out of
service will not declare alarms.
¥ Hardware Rev
This is a viewÐonly Þeld. The hardware rev is set at the factory and
cannot be changed.
¥ Module Name
Enter an alphanumeric name of up to 20 characters (numbers, letters,
and spaces are acceptable).