User`s guide

Conﬁguring the DL3100 4-21

¥ Contents of the TDL Message Received (C-bit Parity Format)

The following parameters are view-only parameters and cannot be

changed.

¥ Data Path (Idle or Test) Signal Received from DTE (Carrier)

The TDL message received is either DATA PATH, IDLE or TEST, and

was received from the DTE or the CARRIER.

¥ Equipment IdentiÞcation Code

IdentiÞes the type of equipment sending the message.

¥ Location IdentiÞcation Code

IdentiÞes the location of the unit sending the message.

¥ Frame IdentiÞcation Code

IdentiÞes the equipmentÕs location within a building at a given location.

¥ Equipment Location IdentiÞcation Code

IdentiÞes the equipmentÕs location within an equipment bay.

¥ Facility IdentiÞcation Code

IdentiÞes the particular DS3 path involved in generating the message.

Conﬁguring the HSDB and the HVDB

The HSDB and HVDB Main Menus contain a number of submenus that

you use to conÞgure, monitor, and manage the HSDB and HVDB.

To access the HSDB or HVDB Main Menu, select the HSDB or HVDB

device from the Node/T3MB Main Menu.

Figure 4-10 shows an example of the HSDB Main Menu. The HVDB Main

Menu looks exactly like the HSDB except for the title.