User`s guide

4-14 DL3100 User’s Guide—November 1998

¥ Terminal XON/XOFFÑEnabled or Disabled (DefaultÑEnabled)

EnabledÑEnables a software ßow control feature which causes the DTE

device to stop sending data when the terminalÕs buffers are full. You can

resume the ßow of data, by pressing any key and stop it by pressing

Ctrl-S.

DisabledÑSet to Disabled when your terminal or network management

station does not support XON/XOFF.

¥ Terminal MultidropÑEnabled or Disabled (DefaultÑEnabled)

EnabledÑIf the terminal is connected to more than one DL3100 unit,

this must be set to Enabled. It enables you to daisy-chain and monitor

up to 12 DL3100s for centralized network management.

The Login ConÞguration Menu lets you add users, set the login passwords,

set the access type, and activate automatic logout.

To open the menu, select Login ConÞguration in the Node ConÞg Menu

and press Return.

Figure 4-6 Login Conﬁguration Menu

When you log on to a DL3100 for the Þrst time you are User 1 with full

access privileges.