User`s guide

4-12 DL3100 User’s Guide—November 1998

¥ TIME

Enter a valid time with the format hh:mm:ss.

hh 0-23 hours

mm 0-59 minutes

ss 0-59 seconds

Example: 8:4:39 yields 08:04:39

¥ AutogrowÑOn or Off (DefaultÑOn)

This feature is for factory use only and should remain On.

¥ Automatic BackupÑ15 seconds, 30 seconds, one minute, or Þve minutes

after a database change; after every database change; Off. (You must

select ConÞrm to save your change). (DefaultÑ5 minutes after a

database change)

Select the amount of time when the database, if modiÞed, is

automatically backed up to the EEPROM.

¥ Front PanelÑOn or Off (DefaultÑOn)

Lets you conÞgure or run tests using the front panel display buttons.

¥ Permit Select Device from Remote

Permits or denies a remote user access to the local DL3100 by setting

this parameter to Yes or No.

NOTE: You can also back up the database manually with the Backup

Database command in the Node/T3MB Main Menu. (See “Backing Up

the Database” on page 5-27 in Chapter 5, “

Monitoring and

Managing the DL3100.”

)