User`s guide

DL3100 Quick Conﬁguration 1-7

Figure 1-5 HSDB Conﬁguration and Connections

Conﬁguration Actions

▼ Set the number of T3 Timeslots to be allocated to the DTE

device. Setting the number of T3 Timeslots will set the port rate

of the HSSI (HSDB) or V.35 (HVDB) port. The DL3100 splits the

T3 (DS3) into 147 timeslots at 300 kbps each. Therefore,

assigning 10 timeslots will yield a HSSI or V.35 port rate of 3

Mbps. Setting all 147 timeslots will yield 44.2 Mbps or full T3

(DS3) rate. Both the local and remote DL3100s must be set the

same. Because of the V.35 limitations, it is not recommended to

assign more than 4 Mbps to the V.35 port with SCT clocking

option. With SCTE, you can achieve rates up to 10 Mbps.

To go back to the Node/T3MB Main Menu, select Select Device from the

HSDB/HVDB Main Menu and press Enter twice, or type 0 and press

Enter.