User`s guide
I-4 DL3100 User’s Guide—November 1998
I
network status from front panel 7-14
node status from front panel 7-13
statistics 5-13
Motorola S-Record 5-26
mounting
DL3100 3-4
front 3-4, 3-5
mid 3-5
multidrop mode
for daisy-chaining 4-4
N
network
installing 3-8
monitoring alarms and status 5-5
monitoring statistics 5-14
port interface speciÞcations A-1
tests 6-6
Network Tests Menu 6-6
node
conÞguring 4-9, 4-10, 5-3
Node ConÞguration Menu parameters 4-11
node database, resetting 5-27
Node IP address 4-27
Node IP subnet mask 4-27
node number 4-13
node software, restarting 5-26
Node/T3MB Main Menu 4-6, 5-1
Node/T3MB Main Menu selections 4-8, 5-2
O
option slots 4-8, 5-2
Out Of Frame (OOF) 5-16
P
parameters
setting in a menu 1-2
parity bit 4-1
payload 2-3
P-Bit Parity Errors (P-BIT) 5-17
pin assignments
data port connectors B-1 to B-2
power
120 to 240 VAC (AC power) 3-6
-48V (DC power) 3-7
AC 3-3, 3-6
DC 3-6
grounding cable 3-3
speciÞcations A-4
supply 2-2, 3-3
terminal block on rear panel 3-7
Warning! 3-7
power up 3-7
Q
quick conÞguration 1-1 to 1-7
R
rack
19-inch 3-4, 3-5
23-inch 3-5
RAM Code, deleting 5-26
read community string 4-27
rear panel
DL3100, illustration 3-8, 4-2
regulatory speciÞcations A-5
remote
Remote Node Map 4-9, 5-3, 5-5
Remote Node Terminal Access 4-9, 5-3
selecting 7-6
Reset Entire Node Database 5-27
restarting node software 5-26
restricted access area 3-2
reverting to ROM code 5-26
RFC1407 MIB far end statistics support 5-18
RG59 cable 3-9
ROM Code, reverting to 5-26
S
scrambler 4-17
SCSI connector, installing HSSI DTE 3-8
selecting
remote or local unit 7-6
select device 4-22
self-test, error messages 6-1
service parameter 4-17
Severely Errored Second (SES) 5-16
SNMP
#bits and parity 4-28
baud rate 4-28
comm port speciÞcations A-3
conÞguring 4-9, 4-26, 5-3
IP subnet mask 4-27
Node IP address 4-27
read community string 4-27
SNMP ConÞguration Menu 4-26
SNMP ConÞguration Menu parameters 4-27
stop bits 4-28
trap community string 4-28
Trap IP address 4-27
write community string 4-28
software download 5-25
Software Download Menu 5-25
speciÞcations
alarm inputs A-3
alarm parameters A-6
alarms A-6
communication port (ASCII) A-3