User`s guide

A-4 DL3100 User’s Guide—November 1998
A
Diagnostics
Table A-7 lists the diagnostic tests and test indicators.
Power
The power requirements are as follows:
120 VAC, 0.5 A maximum (110 VAC to 230 VAC, 47 Hz to 63 Hz)
220 VAC, 0.25 A maximum
-48 VDC, 1.2 A maximum (-42 VDC to -72 VDC)
The DL3100 is protected by a user serviceable external fuse rated at 250
volts, 1.6 ampere.
Mechanical
Table A-8 lists the mechanical information.
Data bits 8
Stop bits 1, 1.5, or 2
SNMP XON/XOFF Enable or Disable
Connector DE-9 socket
Protocol SNMP (UDP/IP) over SLIP
Table A-7 Diagnostics
Item Description
Loopbacks Local and remote DTE/Network
LEDs (network)
INS, ALM, RED, YEL, BLU, BPV, PA R
LEDs (per DTE port) INS, TEST, TD, RD, TA /RTS, CA/CTS, DTR
Mini patch jacks T3 Send Monitor
T3 Receive Monitor
Table A-6 Communication Port (SNMP NMS) (Continued)
Item Description