User`s guide

7-14 DL3100 User’s Guide—November 1998
7
RAM FAILURE
ROM CHKSUM FAIL
UNIT RESET
DATABASE RESET
POWERSUPLY ERR
FAN FAILURE
BATTERY FAILURE
RT CLOCK ERROR
EXTERNAL ALARM
Use the up and down arrows to view additional messages.
Monitoring the Network Status
You use the Network Status Menu to view the status of the T3 network.
The message ÒNET STATUS OKÓ will appear if the T3 network is operating
properly.
To view the network status, press ENTR from the Network Status Menu.
If one of more errors are detected, the display will show one or more of the
error messages deÞned in ÒMonitoring Network Alarms and StatusÓ on
page 5-5 in Chapter 5, ÒMonitoring and Managing the DL3100.Ó
Monitoring HSDB/HVDB (1, 2, 3) Status
You use the HSDB and HVDB Status Menus to view the status of the
existing DTEs.
The message ÒDTE STATUS OKÓ will appear if the DTE is functioning
properly.
To view a DTEÕs status, press ENTR from the corresponding (1, 2, or 3)
HSDB or HVDB Status Menu.
If one of more errors are detected, the display will show one or more of the
error messages deÞned in ÒMonitoring HSDB and HVDB Alarms and
StatusÓ on page 5-9 in Chapter 5, ÒMonitoring and Managing the DL3100.Ó
Monitoring Network Statistics
You use the Network Statistics Menu to view and clear the T3 network
performance statistics.