User`s guide

7-8 DL3100 User’s Guide—November 1998

Use the up and down arrows to move from item to item. To activate edit

mode, press ENTR.

Node Conﬁg Menu Parameters

The Node ConÞg Menu parameters are as follows:

¥ Unit ID, node number, date and time

Edit each item one character at a time. To move to the next character,

press ENTR.

¥ Node Comm Port submenu

You can display and modify the comm port settings from the front

panel Comm Port submenu.

The Comm Port Parameters

The comm port parameters are:

¥ Baud Rate

¥ Parity

¥ Data Bits (Terminal # Bits)

¥ Stop Bits

¥ Use XON/XOFF

¥ Multidrop Mode (Terminal Multidrop)

The front panel displays one parameter and its current value.

To view and modify the comm port settings, follow the procedure in the

example below.

1. From the ConÞguration menu, press ENTR and then the down

arrow to access the Node ConÞg Menu.

2. Press ENTR to open the Node ConÞg Menu.

The Node ID parameter appears.

3. Press ENTR again to view the ID.

Example: 3100DSM_ _ _ _ _ _ _ _ _

NOTE: Parameters shown in parenthesis are the names of the

equivalent parameters in the terminal interface.