User`s guide

7-6 DL3100 User’s Guide—November 1998
7
Keeping a Record
We suggest you keep a written record of each unitÕs conÞguration. For a
copy of the conÞguration worksheet, see ÒConÞguration WorksheetÓ on
page A-11 in Appendix A, ÒDL3100 Technical SpeciÞcations.Ó
Selecting the Remote or Local Unit
The Select Local/Remote command works like a toggle switchÑyou
switch between the local and remote unitsÕ front panel interface to monitor
one or the other.
At the Select Local/Remote display, press ENTR. The display will begin
blinking. Press ENTR again to switch.
When the remote unit is selected, the letter R will precede all the menu
displays.
Figure 7-5 Selecting the Remote Unit
Configuring the DL3100
You use the ConÞguration Menu to conÞgure various parameters of the
unit, the network and the DTE boards. The ConÞguration Menu consists of
three submenus: the Node ConÞg, T3 Net ConÞg and HSDB/HVDB (1, 2,
3) ConÞg Menus.
To open the ConÞguration Menu, use the up or down arrows to move to
the Menu and press ENTR.
The Backup Database submenu appears.
NOTE: The Backup Database function is also found under the
Configuration Menu.
SELECT REMOTE
R,SELECT LOCAL
ENTR
ENTR
SELECT REMOTE
blinking
GR492