User`s guide

Using the Front Panel Interface 7-5
7
Figure 7-4 Edit Mode
5. Edit the ID one character at a time.
Use the up and down arrows to change a character.
6. Press ENTR for the changes to take effect
7. Repeat the process for each character.
8. To exit the edit mode once you have completed all the desired
changes, move the cursor to the next underlined space (_) and
press ENTR. Then press EXIT to exit the parameter.
or
wait for the display to return to its default state,
or
press EXIT to exit without executing any changes.
Preparing for the Initial Configuration
Before you start an initial conÞguration, you need to have the required
information ready and establish a method of record keeping.
Required Information
Before you conÞgure the unit, we suggest you collect the following
information:
▼ Framing and line code requirements as speciÞed in the work
order from your service provider
3100 _ _ _ _ _ _ _ _ _ _ _ _
NODE ID
3100_ _ _ _ _ _ _ _ _ _ _ _
ENTR
ENTR
first character
starts to blink
GR491