User`s guide

Monitoring and Managing the DL3100 5-27
5
¥ Reset Entire Node Database to Factory Defaults
This operation resets the unitÕs database to its original factory settings.
To perform any of these tasks:
1. In the Desired Action Þeld, cycle through the three tasks using the
Space Bar. Press Return to select the task.
The system sends you a warning message:
DO YOU REALLY WANT TO DO THIS? PLEASE CONFIRM:
2. If you are sure you want to do this, select ConÞrm (or select Exit to
cancel).
Figure 5-14 shows Reset Entire Node Database to Factory Defaults selected
in the Delete Entire Unit ConÞguration Menu.
Figure 5-14 Delete Entire Node Configuration Menu
Backing Up the Database
To manually backup the database to the EEPROM, select Backup Database
from the Node/T3MB Main Menu and press Return. The following
message will display indicating that the backup is complete:
WARNING: Perform the Delete Entire Node Configuration task with
great caution. It may interrupt service and adversely affect service.