User Manual
11
USER’S GUIDE
3-POINT LED LIGHTING SYSTEM
Safety
Precautions &
Warnings
a. To avoid the risk of permanent eye damage, do not look directly
into the lights or aim the lights directly into another person’s eyes.
b. Lights and batteries must be used exclusively for the purpose
described.
c. Under no circumstances should you open the housing of lights,
batteries or power supplies. Never take the devices apart or
undertake modifications. Misuse of batteries can cause them to
become hot, explode, or ignite and may cause serious injury. Make
sure that the following safety precautions are expressly followed:
• Never open the light units.
• Never make any changes/modifications to the batteries or lights.
• Do not expose batteries or lights to fire or severe heat
(over 158°F or 70°C).
• Do not short circuit (do not connect via a conductor or reverse polarity).
• Protect from fluids and damp environments.
• Do not use the devices if damaged.
• Maintainstorageandoperationaltemperatureof32˚F-95˚F(0°-35°C).
d. Do not use lights or power supply units if housing or plugs are
damaged.
e. If you determine that a light unit or battery is excessively hot, emits
an odor, or changes color or shape, turn it off immediately and
disconnect from any power source. The device should not be used
again and should be immediately returned to Digital Juice.
f. Do not store within reach of children.
g. Use only the supplied AC adapters or Lithium-ION rechargeable
battery packs to power your lights. Normal SONY F series batteries
on the market can NOT be used interchangeanly with the provided
2600mAh Lithium-ION rechargeable battery packs.
h. The Lithium-Ion batteries provided in this kit should be used ONLY
with their compatible MiniBurst light units. Please do not try to use the
battery packs on other devices, to avoid damage to the other devices.
g. This product should not be treated as household waste. It is made
of recyclable materials and should be disposed of in accordance
with local and state regulations.
h. The shipped version of this device complies with the requirements of
ECC directives 89/336/ECC and 73/23/ECC.
i. When lights are attached to a power source via the supplied AC
adapters, please remove the battery pack from the device except
when you are charging batteries on the integrated battery charg-
ing system on the MiniBurst 504 lights. Also remove battery pack
from light if it is not to be used for a long time.
WARNING:
The battery packs
for the MiniBurst
504 lights are not
interchangeable
with the ones for the
MiniBurst 256 lights
and vice versa.
Please do not try to
use the 2600mAh
14.8v Lithium-
ion rechargeable
battery packs on
the MiniBurst 256
or the 7.4v NP-F
type (6000mAh)
battery packs on the
MiniBurst 504.
The supplied battery
charging kit is only
for the MiniBurst
256 7.4v NP-F
type (6000mAh)
batteries and the
integrated charger
on the back of the
MiniBurst 504 is
only for the supplied
2600mAh 14.8V
batteries.