Instruction manual

SYNC-SWITCH - MANUAL 8
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SYNC-SWITCH – Manual – Rev 1.1 - 8 -
Main Operation
The main purpose of the SYNC-SWITCH is to act as a Gigabit Switch (copper and fiber) and to timestamp PTPv2
packets.
It also implements many Carrier Grade Ethernet features that are briefly illustrated in the following paragraphs.
In order to access the WEB interface is sufficient to open the page http://192.168.200.2
To authenticate on the Switch the default credentials are:
Username: admin
Password: <empty>
Contextual help can be opened with the help icon in the upper right corner of the WEB Interface and contains in-
depth descriptions about all the advanced settings.
It is possible to use Cat-5 / Cat-5e / Cat-6 RJ45 cables for copper connectivity and LC/PC single mode fiber patch cords
with 1000 BASE-LX SFP modules.