Instruction manual

SYNC-SWITCH - MANUAL 4
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SYNC-SWITCH – Manual – Rev 1.1 - 4 -
Simboli di sicurezza
Safety Symbols
Sono presenti sul dispositivo e nella documentazione simboli utilizzati per la segnalazione di segnalazione
conformi alle specifiche IEC61010-1 II.
Safety-related symbols used on equipment and documentation comply with IEC 61010-1 II.
• SIMBOLO DIRECT CURRENT IEC 417, N°5031
Vdc may be used on rating labels
• SIMBOLO ALTERNATING CURRENT IEC 417, N°5032
For rating labels, the symbol is typically replaced by V and Hz as in 230V, 50Hz.
• SIMBOLO PROTECTIVE CONDUCTOR TERMINAL IEC 417, N°5019
This symbol is specifically reserved for the PROTECTIVE CONDUCTOR TERMINAL and no other. It is
placed at the equipment earthing point and is mandatory for all grounded equipment
• SIMBOLO CAUTION ISO 3864, N°B.3.1
used to direct the user to the instruction manual where it is necessary to follow certain
specified instructions where safety is involved.
Changelog
Rev. Note Data
1.0 First review 28/10/2012
1.1 Added PTP master support 31/01/2014