Instruction manual

SYNC-SWITCH - MANUAL 20
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SYNC-SWITCH – Manual – Rev 1.1 - 20 -
Technical Data
Frequency Reference
Signal 10 MHz sine wave
Spectral Purity -70 dBc (harmonic)
-75 dBc (non-harmonic)
Phase noise -125 dBc at 1kHz
Output level 13 dBm
Output impedance 50 Ω
Output connector BNC
Stability 1e-12 daily average (OCXO locked to GPS on SA)
1e-10 daily average (OCXO free run)
Time Reference
Signal 1 PPS, 100µs Duty, Rising Edge
Output level TTL 5 Vpp, Square wave
Output impedance 50 Ω
Output connector BNC
PTP Section
Network connection N° 8x Ethernet 10/100/1000 interfaces, 2x 1/2.5 Gigabit SFP interfaces
Protocol IEEE 1588-2008 (PTPv2)
Role End-to-End Transparent Clock or Grandmaster Clock
Time stamping Hardware
Precision 8 ns
Options Multicast, Unicast, E2E, P2P, UDP/IPv4, Layer 2, 802.1Q, SyncE
Signalling
Signalling Leds on front panel
Serial Connection RS-232 connector IDC-10
Supply
Input N° 1 supply
Network 95 Vac < > 240 Vac Plug IEC320 integrated, filter EMI/RFI
Sizes
Width 1 Unit 19’’
Depth 300 mm without connectors
Weight 1.5 Kg
Accessories
Handbook in English
Certifications CE