Instruction manual
SYNC-SWITCH - MANUAL 10
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SYNC-SWITCH – Manual – Rev 1.1 - 10 -
Configuration
The Configuration panel allows to modify settings related to the device behaviour as the port settings, speed, duplex,
synchronous clocking reference, and others.
System
The switch system information is provided here.
System Contact
The textual identification of the contact person for this managed node, together with information on how to contact this
person. The allowed string length is 0 to 255, and the allowed content is the ASCII characters from 32 to 126.
System Name
An administratively assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
A domain name is a text string drawn from the alphabet (A-Za-z), digits (0-9), minus sign (-). No space characters are
permitted as part of a name. The first character must be an alpha character. And the first or last character must not be a
minus sign. The allowed string length is 0 to 255.
System Location
The physical location of this node(e.g., telephone closet, 3rd floor). The allowed string length is 0 to 255, and the allowed
content is the ASCII characters from 32 to 126.
Timezone Offset
Provide the timezone offset relative to UTC/GMT.
The offset is given in minutes east of GMT. The valid range is from -720 to 720 minutes.
Configure the switch-managed IP information.
The Configured column is used to view or change the IP configuration.
The Current column is used to show the active IP configuration.
DHCP Client
Enable the DHCP client by checking this box. If DHCP fails and the configured IP address is zero, DHCP will retry. If
DHCP server does not respond around 35 seconds and the configured IP address is non-zero, DHCP will stop and the
configured IP settings will be used. The DHCP client will announce the configured System Name as hostname to provide
DNS lookup.
IP Address
Provide the IP address of this switch in dotted decimal notation.
IP Mask
Provide the IP mask of this switch dotted decimal notation.