Instruction manual
MXS-EVO - MANUAL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MXS-EVO – Manual – Rev 1.7 - 8 -
Connectors details
TLS connector (Remote signals)
1
The 8 poles TLS connector provides the following information on the various pins (from left to right):
PIN 1: Common contact
PIN 2: Closed contact Right power supply provided
PIN 3: Closed contact Left power supply provided
PIN 4: Closed contact GPS reference present and valid
PIN 5: Closed contact EXT reference present and valid
PIN 6: Closed contact E1 reference present and valid
PIN 7: Closed contact PTP reference present and valid
PIN 8: Closed contact Synchronization completed
TLC connector (Remote controls)
1
The 8 poles TCL connector provides the following commands on the various pins (from left to right):
PIN 1-2: Closed contact Manual switch
PIN 3-4: Closed contact Automatic switch
PIN 5-6: Closed contact Switch over previous reference
PIN 7-8: Closed contact Switch over next reference
Programmable outputs
A tecnhical sheet about the programmable outputs is given alongside the device.
The following table can be taken as reference to understand it.
J8A 1A J9A 1B J10A 1C J11A 1D J12A 1E J13A 1F J14A 1G J15A 1H
J8B 2A J9B 2B J10B 2C J11B 2D J12B 2E J13B 2F J14B 2G J15B 2H
1
1
1A 1B 1C 1D 1E 1F 1G 1H
2A 2B 2C 2D 2E 2F 2G 2H