Instruction manual
MXS-EVO - MANUAL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MXS-EVO – Manual – Rev 1.7 - 6 -
Summary
This manual provides to the user of the apparatus MXS-EVO all the information necessary for proper operation. The
informations include the normal installation procedures and any data on the maintenance and programming in order to
facilitate interventions in the field.
MXS-EVO is a multiple output signal generator able to reconstruct stable time-frequency references (10MHz, PPS,
2.048MHz, E1, IRIG-B).
It is composed of a GPS receiver and accepts in input a frequency RF signal, a timing RF signal, an E1 multiframe
signal and an IRIG-B signal. It is possibile to use any or all of these references tot une the internal high stability OCXO.
In the standard version there are 12 independent programmable outputs in any of the possible configurations (10 MHz,
PPS, 2.048 MHz, E1, IRIG-B AM, IRIG-B DC), 1 E1 input and 1 E1 output, 1 time input and 1 frequency input, 1
optical IRIG-B input, 1 optical IRIG-B output, 1 TTL IRIG-B input (may be used in place of the external timing input).
MXS-EVO is a very flexible solution suited to all those applications where is necessari to provide a stable time-
frequency reference to multiple devices. whilst mantaining electrical isolation.
When an error on the selected source is observed an error condition is generated via SNMP and dry contacts and a new
source is selected between the available ones as per user configured priority.
MXS-EVO is quite simple to use and to set-up. Every function can be accessed locally from the LCD panel and
remotely via WEB or SNMP.
MXS-EVO gives informations about its internal status via 7dry contacts placed on the rear panel and the LEDs on the
front panel.
MXS-EVO has double Power Supply Unit, to ensure best safety and uninterrupted work.
MXS-EVO is in metallic box of sizes 1U 19’’for rack installation.
Note
This document may contain confidential and or reserved material of property of Digital Instruments S.r.l. It cannot
be reproduced, used or shown to third parties for any other scope than the intended one.
WARNING: Before inserting the power supply please carefully read all instructions for proper
installation.