Instruction manual

MXS-EVO - MANUAL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MXS-EVO – Manual – Rev 1.7 - 4 -
Simboli di sicurezza
Safety Symbols
Sono presenti sul dispositivo e nella documentazione simboli utilizzati per la segnalazione di segnalazione
conformi alle specifiche IEC61010-1 II.
Safety-related symbols used on equipment and documentation comply with IEC 61010-1 II.
• SIMBOLO DIRECT CURRENT IEC 417, N°5031
Vdc may be used on rating labels
• SIMBOLO ALTERNATING CURRENT IEC 417, N°5032
For rating labels, the symbol is typically replaced by V and Hz as in 230V, 50Hz.
• SIMBOLO PROTECTIVE CONDUCTOR TERMINAL IEC 417, N°5019
This symbol is specifically reserved for the PROTECTIVE CONDUCTOR TERMINAL and no other. It is
placed at the equipment earthing point and is mandatory for all grounded equipment
• SIMBOLO CAUTION ISO 3864, N°B.3.1
used to direct the user to the instruction manual where it is necessary to follow certain
specified instructions where safety is involved.
Changelog
Rev. Note Data
1.0 First revision 30/11/2011
1.1 Updated and fixed revision 16/03/2012
1.2 Added programmable outputs details 11/04/2012
1.3 Added note about the internal NTP server 18/04/2012
1.4 Added section about Custom Settings 30/10/2012
1.5 Updated changelog 02/05/2013
1.6 Added notes about the NTP server timestamping 14/10/2013
1.7 Added FAQ section 31/10/2013