Instruction manual

MXS-EVO - MANUAL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MXS-EVO – Manual – Rev 1.7 - 30 -
Event Log
On the WEB is available the apparatus log from Event log section.
50 entries are presented.
It is possible to delete the logs and save them in csv. format.
Events related to the board
Event Code 001 Power ON  Apparatus on
Event Code 002 Switch  Switching on GPS / EXT / E1 source
Event Code 003 PPS alarm  Alarm on PPS (1÷4)
Event Code 004 Clock alarm  Alarm on 10 MHz (1÷4) signal
Event Code 005 GPS Serial  Detection or loss of connectivity of the GPS radio
Event Code 006 Supply  Insertion or removal of a power supply (L, R)
Event Code 007 Switch Alarm  More than 3 exchanges in less than 5 minutes
Event Code 008 GPS PPS  Status change of PPS from satellite
Event Code 009 GPS Antenna  GPS antenna connection or disconnection
Event Code 010 Bad Vtune  Vtune incorrect value
Event Code 011 PPS Syncr  Sychronization completed
Event Code 012 E1 Signal  Change in the status of the presence of the E1 signal
Event Code 013 E1 Frame  Change in the status of the presence of the E1 framing
Event Code 014 E1 PPS  Change in the status of the presence of the E1 PPS
Event Code 015 EXT Freq  Change in the status of the presence of the EXT frequency
Event Code 016 EXT Time  Change in the status of the presence of the EXT time
Event Code 018 PTP PPS  Change in the status of the PPS rebuilt by PTP
Event Code 019 IRIG-B  Change in the status of the presence of the IRIG-B signal