Instruction manual

MXS-EVO - MANUAL
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MXS-EVO – Manual – Rev 1.7 - 21 -
Frequency Ref.
Value: <frequency value> [Hz]
Valid: YES / NO
Tolerance: ± <value> [Hz]
Time Ref.
Period: <period value> [ms]
Valid: YES / NO
Tolerance: ± <value> [ms]
TD: <value> [ns]
EXT
Settings
Accepted frequency: 1MHz - 2MHz - 2.048MHz - 5 MHZ - 10 MHz
Accepted time: 1 PPS
Status
Signal Status: No Signal / OK
Framing Status: No Framing / OK
SSM Quality Level: <SSM quality received>
Bit Error Rate: <value>
BERT Irq Array: 00000000 ÷ 01111110
TD: <value> [ns]
Board Type Slave / Master
SSM Quality Sent <SSM quality sent> (only in E1 Master mode)
PPS Timeslot Rx 2 ÷ 32 (17 excluded)
PPS Timeslot Tx 2 ÷ 32 (17 excluded)
BERT Rx ON / OFF
BERT Tx ON / OFF
BERT Timeslots Rx ON / OFF for 32 timeslots (from 1 to 32)
BERT Timeslots Tx ON / OFF for 32 timeslots (from 1 to 32)
SSM Column Rx 4 ÷ 8
E1
SSM Column Tx 4 ÷ 8
Status
Status: UNKNOWN / SLAVE / MASTER / …
TD: <value> [ns]
Enabled ON / OFF
Board Type Slave / Master
Jitter 1 ÷ 255
Unicast ON /OFF
Dest 0.0.0.0 ÷ 255.255.255.255
Priority 0 ÷ 255
PTP
Profile DEFAULT, TELECOM, POWER
Status
Present YES / NO
Date Date and Time
TD: <value> [ns]
IRIG-B
IRIG-B Mux In Optical / Electrical
Date & Time 00:00:00 01/01/01 ÷ 23:59:59 31/12/99
Timezone -12 ÷ 12
Clear Log Clear
Restore Defaults Restore
Setup
Reboot Reboot