User manual

User Manual Page 74
EDIsecure
®
XID 8300 Printer Driver
The following keywords in an encoding string are reserved by the driver and processed in a special way.
Keyword Option Format Description
pi mandatory Text
Plug-in name
This name must match with the one shown in the Installed
Plug-ins list in Plug-in Manager.
ft optional Text
format template name
This name must match with one of the format templates shown
in the Format Templates list in Plug-in Manager for the Plug-in
selected above (keyword "pi").
so optional Number
sequence order
This specifies the sequence order and should only be used when
using multiple encoding strings on one card. The numbers can
be chosen freely.
The encodings will be processed in ascending order.
If two so-numbers are equal, the processing order of the two is
undefined and dependent on the application!
pre optional -
precode step
This indicates that this is a precode step in which the card will
only be loaded but not yet printed.
This attribute must be present in the precode step and must be
omitted in the second (encode) step. It has no value!
In addition, the printer will be locked for the precode-id (see
below).
pid optional Number
precode id
The number must uniquely identify the precode step and must
be the same on the second (encode) step.
This attribute is mandatory in an environment where precoding is
done and must be present in both steps.
The application needs to take care that each card to be printed
and encoded gets a unique precode ID that is used for both
steps.
The printer is locked in the first step for this precode ID and only
a second job with the same ID can unlock the printer. Therefore
it is required that other cards have different IDs.