User manual

User Manual Page 66
EDIsecure
®
XID 8300 Printer Driver
6.2.4 Configuration (Global Settings and Test)
The most important part in the chip encoding setup is to test the communication with the encoding device
and to test if the encoder can access, write to and read from the chip. Some encoders require even global
settings like authentication keys or the transfer speed, which is common for COM ports.
Each Plug-in can optionally provide a user interface for both, the global settings and the encoding test. If
one of these or both are supported, the corresponding buttons "Settings..." and "Test..." will be enabled.
If these options are provided by the Plug-in, clicking on either button will open a configuration or a test dialog
and show the corresponding functions that are necessary to configure the encoder hardware and to test the
encoding of the card.