User manual

User Manual Page 19

EDIsecure

XID 8300 Printer Driver

3.2.3 Set-up for Control of Printing / Encoding

The Setup for Layout Orientation is the "central point" of orientation definition of cards and usage of ribbons.

With a minimum of mouse clicks you can define every combination you need. By default, the intelligent

printer driver’s matrix calculates the fastest possible print out speed. However, the operator can always

decide between material usage vs. print speed.

Flip Axis: Here you can setup the orientation of the 'card body', which is the same as the

function as former 'Image Orientation'. The advantage is that you do not need to imagine how

the card will rotate. Just pick up a card and you will understand the idea behind flipping the card

horizontally or vertically.

Side A or B: Use the pull down menu to set up the patch usage of the color ribbon for side A

(Front side) and side B (Back side).

Rotation / Swap: The rotation button will rotate the full card 180°, while the swap button will

exchange the front and back of the layout.

For more details, please refer to Appendix A at the end of this document!

3.3 K/PO Panel

3.3.1 Introduction

This tab allows you to both define the kind of extraction methods for placing different objects to the K-plane

(Carbon black) and to define inclusion areas for PO (peal-off) separately for front and back