Instruction manual

Instruction Manual Page 6
EDIsecure
®
XID 8300 Ethernet Status Monitor
1.2 Screen Configuration
 Close button: Closes the status monitor.
 Screen selection tabs: Use these to switch to the following screens.
 Printer Status: Displays the printer’s status.
 Printer Setting: Displays and enables specification of the printer’s print settings.
 Retransfer: Displays and enables setting of the conditions during retransfer of the card.
 Bend Remedy: Displays and enables setting of the conditions during bend remedy of the
card.
 Media Setting: Displays the ink ribbon’s status and enables setting of the card or retransfer
film.
 Property: For verifying the device configuration as well as printer’s firmware version.
 Laminator: XXX
 Printer Select: For selecting a printer and setting the network.
 Security Lock: XXX
 Others: For performing test prints and specifying other settings.
 Minimize button: Minimizes the status monitor to an icon. The icon is displayed in the task bar.