Instruction manual

Instruction Manual Page 23
EDIsecure
®
XID 8300 Ethernet Status Monitor
Note
1. The “Details” button is enabled when “IP Sec Enable” is selected.
2. You cannot make a selection by pressing the “Pre-shared Key” or “Printer Certificate” button.
Refer to the table below on whether encrypted communication using IP Sec is allowed.
PC’s IP Sec Policy
Printer Setting
Security Required
Request for Security
Not Protected
“IP Sec Disable”
Communication
Disabled
Normal
Communication
Normal
Communication
“IP Sec Enable” (When
authentication fails)
Communication
Disabled
Normal
Communication
Normal
Communication
“IP Sec Enable” (When
authentication is
successful)
Encrypted
Communication
Encrypted
Communication
Normal
Communication
 Pressing the “Details” button displays the “IP Sec Setting” screen, and enables you to send
the download file required for IP Sec authentication to the printer.
The “pre-shared key file” is required for “pre-shared key authentication”.
The “printer certificate file” and the “certification authority certificate” are required for “printer certificate
authentication”.