Instruction manual

Instruction Manual Page 19
EDIsecure
®
XID 8300 Ethernet Status Monitor
7 Checking Printer Configuration
7.1 [Property] Tab Sheet
The “Property” screen enables you to verify the device configuration as well as the printer’s firmware version.
 Version: Displays the firmware version of the printer as well as peripheral devices. When optional
devices, such as the MG unit, external IC unit, and laminator, are not connected, this is indicated as
“????”.
 Optional Unit Configuration: Displays the configuration of optional devices.
Caution: When a value other than ”None” is shown in the contact IC encoder or non-contact IC
encoder field, this means the configuration allows mounting of an IC encoder, and does
not indicate that an IC encoder is mounted. Consult our authorized dealers on how to
install the IC encoder.
 Others: Displays the printer’s status.
 Printer Print Counter: Displays the accumulated number of cards issued by the printer.
 Thermal Head Counter: Displays the number of print ink panels for the thermal head. For example,
when printing on a single side using all YMCK inks, 4 are added to each card.