Instruction manual

Instruction Manual Page 17
EDIsecure
®
XID 8300 Ethernet Status Monitor
6.2 Display and Change of Settings
 Ink Status
 Name: Displays the name of the mounted ink ribbon. A message indicating the cause
appears when the ink ribbon cannot be recognized. (Refer to Page 18 of this manual.)
 Number of Ink Sets: Displays the specification of the number of screens which is mounted
ink ribbon. This is not an indication of the current ink level.
 Ink Lot Number: Displays the lot number of the mounted the ink ribbon.
 Card Type:
 Material: Select one of the card materials from “PET-G”, “PVC”, and “PET (0.25 mm)”. An
optimal value for the retransfer speed and temperature settings is displayed according to the
selected card. (Refer to Pages 13 and 15 of this manual.)
 Thickness: Select either “Standard” or “Thin” for the card thickness. If the card thickness is
0.76 mm, select “Standard”. If the card thickness is 0.25 mm, select “Thin”.
Caution
1. To use cards of different thickness, refer to “Switching the card thickness” of the “XID 8300 Instruction
Manual” (separate booklet).
2. When thin cards are used for double-sided printing, errors such as card jam may occur. Use them
only for single-sided printing.
3. If the card material to use varies according to the printer, specify the card material accordingly.
 Film Type: Displays the specifications of the number of screens which is mounted retransfer film. This
is not an indication of the current film level.
 Update button: Applies the selected value to the printer.
 Refresh button: Displays the printer settings on the screen.