Instruction manual

Instruction Manual Page 15
EDIsecure
®
XID 8300 Ethernet Status Monitor
5 Changing Bend Remedy Conditions
5.1 [Bend Remedy] Tab Sheet
The “Bend Remedy” screen enables you to set the conditions for the card’s bend remedy.
5.2 Operation
 Update button: Applies the selected value to the printer.
 Refresh button: Displays the printer settings on the screen.
 Card Type: The appropriate value varies according to the type of card used. You can change the card
type on the “Media Setting” screen. (Refer to Page 16 of this manual.)
5.3 Setting Procedures
The vertical axis in the setting area indicates the bend remedy temperature, and the horizontal axis represents
the bend remedy speed. Click on the corresponding square to change the value. The selected value is
indicated using “*”.